You are currently viewing Components of Water Purifiers And Their Significance

Components of Water Purifiers And Their Significance

Water is a necessity without which living a healthy life is totally out of the question. However, due to the increasing rate of industrialization and the large section of released industrial sludge into the water bodies, it is evident that water will bear harmful microorganisms that can give rise to health issues like typhoid, cholera, dysentery, etc.

To prevent yourself from these water-borne diseases, we recommend using a water purifier. The water purifiers include a plethora of filtration systems and components that ensure that the water has been gotten rid of any harmful contents. These components are important as with each ratifying procedure the water gets purified.

So What Are Some Of The Components That Make The Water Purifier An Essential Part Of The Household?

Depending on the model of the water purifier, the components will vary. Moreover, a purifier may or may not have each of the components mentioned in the list. The probability relies solely on the prototype.

  • Water Supply Connector

A water supply connector is very important as it plays the role of a connector that connects the source of water to the reverse osmosis filter. These water supply connectors come with supply valves.

Normally these are the ones that are mostly seen in the industrial water filtration system nonetheless, the component may include a variety of other parts like valves, saddles. The valves and saddles are variables that are matched accordingly to fit the plumbing configuration.

  • Pressure Regulator

A pressure regulator is also an optional component used to protect the pre-filter housings from the increase of pressure and water hammers. Although all the water purifiers may not have this part, one cannot deny the significance of the part. Normally, standard housings can bear a maximum pressure rating of 75 psi.

  • Sediment Pre-filter

The sediment filter is one of the most important components of a water purifier. It is the part responsible for doing away with sand, grit, insoluble iron, precipitated mineral particles, and other debris that can clog the reverse osmosis membrane.

Moreover, it is the component that helps prevent the clogging of the drain flow restrictor as well. With the application of the sediment pre-filter, the filtration system carries out flawlessly as the water production system doesn’t get withdrawn by the dirt.

Normally, the sediment filtration system will remove any matter that is down to 5 microns. However, the user must replace the sediment pre-filter with the help of Aquaguard service Bangalore every six months.

  • Carbon Filtration System

As we have already discovered how water bodies nowadays are infected by industrial sludge. It contains harmful elements such as lead, sulfur, sodium chloride, and many other microorganisms that can even cause death.

That is where the carbon filtration system comes in, as these components can help reduce the chlorine level. Most city water utilities require water leaving the plant to have the chlorine to a minimum level of at least 1.0 mg/L (1.0 ppm).

The carbon filters are responsible for removing the chlorine from the water while protecting the membrane downstream. It is revealed by a study that increased levels of chlorine disinfection can cause cancer.

Reverse osmosis membranes of the chloramines, normally bearing 1 to 2 ppm and chlorine-bearing 0.1ppm before the damage to the membrane can lead the component to project lower salt rejection.

However, metals in the water, such as iron, can act as a catalyst in the water and accelerate the procedure of oxidation of membranes. That is why the carbon filtration system is very important.

Generally, the activated carbon to disinfect such chloramine effects has to be 5 times more than that of chlorine. That is why most reverse osmosis systems have a 0.5-micron carbon filter specially developed to reduce the chloramine. Nonetheless, it needs to be changed at least once a year by Aquaguard service Bangalore.

  • Auto Shut-off Valve

The main purpose of the auto-shut-off valve is to control the water supply that gets transferred to the reverse osmosis membrane. When the pressurized storage tank fills at least two-third of the feet, the ASO cuts off the water supply to the membranes so that the tank can drain down one-third of the feed pressure before the water can be turned back on. 

  • Reverse Osmosis Membrane

The RO membrane is responsible for doing the most important work. It removes 96% of total dissolved solids, including the salts, minerals, metals and microorganisms, and organic substances from the water. The membrane is responsible for dividing the water into two streams. The filtered water goes to the storage tank while the rejected water travels to the drain.

  • Check Valve

The check valve is another important part of the water purifier that prevents the pressurized filtered water in the storage tank from flowing back towards the RO membrane when the ASO valve shuts off the feed water pressure. The system employs a check valve on the filtered water line after the membrane to ensure that it does not overflow.

Bottom Line

Apart from these components, your water purifier may have a post-carbon inline filter, water storage tank, drinking water faucet, and optional RO components. No matter how many parts your water filtration system has, to keep it effectively functional, you have to conduct an Aquaguard service in Bangalore to assure a constant deliverance of purified water

Irshaad

I'm very passionate about creating unique websites and web applications. I enjoy creating websites with content management systems (CMS) such as WordPress.